Відео

I have had to go back on several jobs and fix the "Back-Stab" switches & outlets installed. Always install on screw terminals.

Great information, I subscribed to your channel and definitely like the videos I watch.

Well mine doesn't sound that bad maybe it's not completely blown out😅

Excellent video, I think you nailed my ongoing AC issue: I'm off to check that Y wire to the new furnace control board now!

Hopefully u disconnected this after test ?

So why does it carry the .23 amps?? Did you ever figure it out?? The egc is still bonded at the main.. and current will flow wherever it can.. if the Nuetral is carrying any imbalance when loads are put on the 240v system.. those amps will make it back to the panel and to the bonding point.. thus slightly energizing the grounding conductor.. it’s the one fallacy our bonding system possesses.. please educate me if I am wrong.

Thanks for the help bro!

Thank you. You are the best. I send you 1$ thanks

Wilde tool started angled head pliers in the 20's

Those are handy however they need to have a longer shaft on them to reach into cabinets. Preferably, a smaller diameter shaft to make access easier.

Thank you for making this video, I started to send mine back for a refund because the company has videos that do not make any sense to me, I saw a video made by this guy and it had a green wire (I did not receive a green wire) I spent 3 hours messing with this thing and my outside temp was over 100 degrees so I was very dissatisfied with this companies tutorials. I just watch your video in its entirety and you made so much sense so Tomorrow I will try to hook this up the way you just did, Thanks so much for saving me the time it is much appreciated, I wish this company would link your videos to their website because his tutorials are total shit! This is one of the cases I would buy from China and get good instructions rather than buying American from a guy who is too lazy to reshoot his video tutorials. I am very grateful that you made such an amazing tutorial for the average person rather than speaking like a robot like the owner of this company. Subscribed!

35 years experience and would never do this way. Straightedge one side and just notch the carpet to align it with the straightedge piece. Separate the pile and notch it from the top. Flip it over and cut and follow the notches from the back. It will be invisible, I started with my dad when they were still sewing seams in the late 60's

when does my TDLR get here ?

yea atiana you do.

Why doesnt downstream gfi outlet work when panel has new gfi type breaker ?

What about grid on one side and solar generator or gas generator on the other?

Knipex warranty is garbage the teeth wear out fast I had a bolt that was stuck bad the other day and the knipex wouldn’t even come close to getting it out told my son go get the blues and bam took it off I forgot how good they work.

your low side gauge is busted/wrong

Job well done. One of the best videos Ive seen in the category of AC. Thank you for positing.

Love you dude!

Excellent video 5 ⭐️

this was legit my issue lawn people sliced a wire or yanked on it and it shorted this fuse

Thanks for clarifying the ambient temperature. Most videos say the pressure should be between 25 and 30 on the low side when recharging and about 190 on the high side and they don't say anything about the ambient temperature. The temperature here was about 102 degrees and my pressures were high around 40 for the low and 210 for the high but I had barely put any from a 12 oz can. It was still not blowing cold air. I put in some more and it started blowing cold air now my high is around 250 and the low still around 40. I will check it at a lower temperature later to see if it has a lower pressure. I was afraid it was too high. Maybe it needs some more.

Wouldn’t the larger one have a more powerful fan/surface space therefore pulling more? Also I’m curious about the initial test because even though you ran the heater , weren’t the other dehumidifiers running , and wouldn’t bc the heat cause some water to evaporate? I think if you could chunk the ice off and throw it out you’d be okay

I'm not an electrician, but I play one as a handyman! very interesting work! I'm a carpenter by trade!

Thank you Ben!

You're a great teacher! Thanks for explaining all the parts and how to connect them. I really appreciate the links provided in the description too!

Great video and I did subscribe-I’m in the process of adding a bathroom to my house so this will come in very handy.

There is no such thing as a pro Trump patriot

These style pliers are great but nothing beats an actual pipe wrench. I prefer the aluminum pipe wrenchs especially on the larger sized wrench. I have a 3ft and a 4ft pipe wrench both made by Ridgid and aluminum makes them a ton lighter compared to cast iron.

Ben, I am OCD, and I see you are too. I have been watching you for a while now and every project you do Is perfect! Thanks for making these videos. :)

My mustang sounds exactly like that what was the problem ?? How much to fix it please ??

My Liebherr upright regular(static) freezer cames with separate 6 drawers ( that you can open just one at the time , the one you need) . The regular one (static) in this video has no separate drawers and of course is less efficient and will need to be defrosted more often than the ones with drawers, because everytime you open the front door a lot of cold will flow out downward ) . My Liebherr regular static Upright freezer is still working perfectly after 25 years..... According to my one experience static is far better because no electronic boards and complicated sensors devices in the frost free ones. Just defrost the static regular upraight freezer every 6 months and will last almost forever.......and is more efficient than the frost free ones.....but separate drawers are a must.......

I have an electric furnace that I need to set up for temp heat

7:19 DC probably stands for digital camera. That's not a distinctive term for the visible-light camera, because the infrared camera is also digital, but it might be based on terminology such as DCIM (digital camera images). It doesn't look like a depth-camera image.

Your meter is on 404

Late to the show, but hreat presentation...good lighting and explanation of your steps! Thanks!

Problem is the bad refresh rate and low resolution for this high price... with TOPDON TC001, you get a 256x162 sensor with 25Hz refresh rate for just 230$ Just sayin..

Where’s the link to the follow up repair video? I don’t see it in the description like promised.

Nice work!

Nice video, and the best part is how simple and jentle the explanation is, keep up the good work Thank you

So if I'm adding a grounding rod and a ground bar to a panel to a house that never had grounds do I run wire from neutral bar to ground bar?

Definitely picking one up

After recharge temperature is -7 to -10 C what is ideal running temperature for no frost upright freezer ?

If it's not starting you need a new unit this is not something a home owner should be doing if your not a professional don't do it you can causes more problems .

Extremely informative video with solid and comprehensive explanation Very clear concise and well done Thank you!!!

I've seen people pounding on them for an hour or more. This was sheer luck lol

OMG it WORKED!!! THANKS Ben :)

Thanks bro!